6840 N. Saint Andrews - Tucson, Arizona 85718 USA - Telephone: 520-577-2414 - Fax: 520-577-0952 - Email: labarr@mclabarr.com |
||||||||||
RESEARCH LAB EQUIPMENT AVAILABLE Autoclave
System: 50 gallon, 316 SS, 600 psi working pressure,
(2) Magna-drive stirrers, Haskell compressor,oxygen
control panel,let-down system and gas dryer.5 gallon, 316
SS autoclave also available (AZ) UTILITY BOX FURNACE Lindberg type
52878 EIB, S/N 828991,1200 degree C capacity 12 CF,
inside dimensions 26"x37"x25", outside
dimensions 47"x70"x52". 208V/50-60 HZ.
Vacuum molded silica fiber insulation, mounted on legs.
Controller has "power on off", temperature
setting 0-1100 degree C, "run",
"reset", "fast", "hold
control", bought new 1982/unused. CONTINUOUS HIGH TEMPERATURE ROTATING FURNACE Silicon
carbide 6"x 3’ tube with (8) 36"x 1
1/2" Globar elements, 2 in series connected and 4
parallel circuits, insulated SS housing. The tube is
chain driven and is variable speed, mounted on a stand,
Eriez vibrating feeder, zirconium/SS discharge hopper. It
has an independent control panel, and it was also used in
a neutral or oxidizing atmosphere with 2 insulated gas
heating chambers with gas burners. The kiln was used for
the decomposition of aluminum chloride crystals. The
capacity is 2-5#/hr. and 1600°C. The unit lacks a
reducer and requires a transformer. 30" FLUID BED INCINERATION SYSTEM The 2200 degree thermal system was originally designed for treatment, destruction, and reduction of toxic and other industrial hazardous wastes. The design capacity for sludge is 150# of dry solids per hour for sludge with 20-25% solids. It was installed as an EPA test facility. It was removed to the Anaconda Research Center in 1982 where it was further instrumented. The Anaconda Research Facility closed and the system is now dismantled and surplus. The complete system includes a Copeland 30" fluid bed reactor, a Peabody preheater and combustion system, a 6T feed bin, an En Massee SS conveyor, 6" screw feeder, a recycle gas system, cyclone separators, aftercooler system, scrubber system, fluid bed controls, conveyor controls, Ph controls, cooler flow controls, Kloechner Mueller switch, differential pressure cells, rotary valves, Cole Palmer voltage controllers, Milltonics flowrater totalizers, 10" x 22" flapper diverter valves, air actuators, Shaw electronic level sensors, D-P pressure sensors, mass flow transmitters, Fisher Porter control system DC1 4000, Dex flexwriter, data acquisition portable control room, pumps, tanks, structure, piping, 2 feed conveyors. Many of the circuits and accessory equipment mentioned above were added to the original sludge plant when the unit was converted to a Pilot Coal Drying Plant. This equipment adds versatility to the Pilot Plant. Since all of the plant components are not large, the plant, although designed for stationary application, could be made semi-portable or portable with small modifications. The new
system purchase price was over $900,000 and the entire
package, dismantled is offered "As Is"
dismantled, Tucson, Arizona. 10" FLUID BED REACTOR 10" x
17" welded 309SS tube with outer brick. A spare
unused 309SS 10" x 17' is included w/heat source os
a Barber-Coleman 425-6272/208 VAC/50 amps, (1) stainless
steel, H2O quench type scrubber (1) rubber lined steel
scrubber 18"D x 20"H with Polypropylene saddles
and grids, solution receiving tanks, blowers, cyclones,
(1) electrical control panel 6'x 30"H/(1) instrument
panel 5'H x 6'H with electrical controls, (7) fluid
raters, temp selector, monitor, (4) controllers, raters,
(3) recorders, D-P transmitter, timer and receiver unit.
Offered "As is-dismantled Tucson, Arizona. ATOMIZER PILOT PLANT Physical Description One complete, fully functional pilot plant for High Pressure Inert Gas Atomization of liquid metals and alloys to produce fine powders in batch sizes from a few pounds up to a maximum of liquified metals. Capacity about 150 pounds (steel equivalent). The major equipment includes one 50 KVA induction melting power supply and furnace; melt atomization chamber with integral melt chamber and powder collection vessels; vacuum pumps; gas delivery system; power handling equipment; controlled atmosphere glove box; automatic oxygen analyzer; vacuum leak test equipment; cooling water recirculation system and heat exchanger; all necessary gauges, instruments and controls; steel framework and platforms; spare parts, equipment manuals and operating instructions. Major Equipment List 1. Melting/atomization chamber, custom manufactured by Atomic Ltd, Inc., 27 Tudor Street, Cambridge, MA. Welded/bolted reactor constructed of Type 304 stainless steel consisting of three contiguous sections, each 33" ID: melting chamber-30" high, atomizing chamber- 48" high, collection cone-28" high. Atomizing chamber and collection cone are water jacketed. Unit is equipped and supplied with furnace support, cyclone, service flanges, valves, powder collection canisters and all necessary valves and fittings. The equipment is disassembled and ready for shipment and offered FOB - Tucson, AZ. 2. Ajax Mangethermic Induction Power Supply Motor/Generatory Type, Model MCG-50-31
Input:
575/480 volts
Output:
400 volts Unit is equipped and supplied with all necessary controls, 13" ID vacuum induction coil, water cooled leads. 3. AC Model HE-453-6 Dri-Lab, consisting of a 4-station, hermetically sealed glove box enclosure for working with powders sensitive to moisture, oxygen and/or nitrogen. All internal surfaces are constructed of 6061 etched aluminum or Lexan plastic. Access is provided through an evacuable antechamber or roof-mounted ports. Unit is equipped with 8 glove ports, 4 duplex 115V electrical outlets, skylights and vacuum pumps. 4. VAC Model MO-40-2V Dri-Train (for use with Item 3), consisting of dual catalytic purification /regeneration trains designed for either manual or fully automatic operation. Unit is capable ofgenerating and maintaining less than 1 ppm oxygen and moisture in a suitable provided inert gas atmosphere inside a glove box enclosure. 5. VAC model AO-316-h-2 Oxygen Analyzer (for use with Item 3), consisting of a Teledyne Model 316 Trace Oxygen Analyzer, Analyzer control panel, high oxygen protection system, audio/visual alarm, 2 gas pumps, valves, plumbing and wiring. The purpose of the unit is to continuously monitor the trace oxygen level in the atmosphere of a glove box and to warn, by alarms, of levels exceeding manually controlled set points. 6. Kinney Model KTC-60 Vacuum Pump, 60 CFM, 2-stage mechanical roughing pump supplied for rapid exchange of atmosphere within melting/atomization chamber. 7. Gas Delivery/Exhaust System with all necessary regulators, manifolds, pressure relief valves, solenoid valves, remote control valves, pressure sensors and vacuum gauges necessary for filling, purging, evacuating and exhausting Items 1 and 3. 8. Veeco Model MS-20 Portable Leak Detector, consisting of a cart-mounted, completely self contained helium mass spectrometer leak detector with microprocessor based electronics, vacuum pumps, remote controls, spare parts kit and maintenance kit for vacuum leak testing Item 1. 9. Control Console: self contained, portable control panel with all necessary operator controls for the safe, remote operation of the atomizer, including a Molytek Model 2702-S 32 channel, programmable strip chart recorder for data logging. 10.
Miscellaneous: spare parts for Items 1 through 10, powder
cannisters, screens, powder property measuring
instruments, pneumatic hoists, pneumatic cleaning
equipment, miscellaneous tools, remote television viewing
camera, vacuum fittings, flanges, gas booster pump (1000
- 3000 psi outlet), cabinets, equipment manuals,
instructions, procedures, (4) counter storage cabinets
and (2) standing eye storage cabinets.
|
||||||||||
All
information on this site is Copyright © 2000-2006 M.C.
LaBarr Mining Machinery. All rights reserved. |
